Granite tile countertop – Many homeowners would love to have granite in their homes, but that they deters by the high costs. Most of this cost comes from work required to remove granite tiles from the ground without damaging them. Fortunately, there is an option. Granite tiles are often cut from smaller or damaged plates and are therefore cheaper than a whole plate. You can save more money by creating countertops with granite tiles yourself; these plates require much less knowledge to use than granite sources. Granite tiles can give you the same advanced look at a fraction of the price.
Prepare base for make granite tile countertop. Loosen and remove any existing countertops. Set a construction level along all the underside edges to ensure they are yet. Cut a piece of 3/4 inch plywood to the right measure for your countertop using a table saw. Put plywood in place on top of the cupboards. Measure the distance from the front of the cabinet to the outer edge of the plywood with a tape measure and use this measurement to mark on the top of the plywood where the cabinets below lie with a pencil. Follow the marks you made and drill through plywood into the best edges of the cabinets to secure it.
Then for make granite tile countertop, score the cement auxiliary board with a break it along the score so you have a bit to fit your countertop. Attach the board over plywood with recessed screws. Create 2-inch pieces of auxiliary board that is long enough for counting edges and screw them into place.
12 Granite Tile Countertop Kitchen Design Photos